Simpson Strong-Tie CPFH09KT (9 oz.) Crack-Pac Flex-H2O Polyurethane Crack Sealer Injection Kit (2 Cartridges)
Couldn't load pickup availability
Bulk Pricing Available
Bulk Pricing Available
Need to place a large order? Request a quote
Simpson Strong-Tie CPFH09KT (9 oz.) Crack-Pac Flex-H2O Polyurethane...
Key Specifications
Description
Description
Simpson CPFH09KT Description
The Crack-Pac Flex-H2O polyurethane injection resin seals leaking cracks, voids or fractures from 1/32" to 1/4" wide in concrete or solid masonry. Designed to perform in applications where water is seeping or mildly leaking from the crack, the polyurethane is packaged in the cartridge and an accelerator is packaged in the nozzle.
Simpson CPFH09KT Includes
- (2) Crack-Pac Flex-H2O cartridge/nozzle sets
- (12) E-Z-Click injection ports
- (2) E-Z-Click injection fittings with 12" tubing
- (1) Pint of ETR paste-over epoxy (8 oz. of resin + 8 oz. of hardener)
- (4) Disposable wood paste-over applicators
- (1) Pair latex gloves
Simpson CPFH09KT Features
- Can be dispensed with a standard caulking tool
- Can also be used on dry cracks if water is introduced to affected area
- Can be used with a reduced amount or without accelerator to slow down reaction time
- Expands to fill voids and seal the affected area
- Fast reacting — reaction begins within 1 minute after exposure to moisture; expansion may be completed within 3 minutes (depending on the amount of moisture and the ambient temperature)
- 20:1 expansion ratio (unrestricted rise) means less material needed
Simpson CPFH09KT Applications
- Sealing cracks ranging from 1/32" to 1/4" wide in concrete and solid masonry
- Repair of cracks in dry, damp, and wet conditions
- Applications where water is seeping or mildly leaking from the crack
Simpson CPFH09KT Installation Overview
- Condition resin and hardener to 60°F (16°C) to 90°F (32°C) before mixing
- Use 30:1 resin to catalyst ratio for standard reaction time
- Add more catalyst for faster reaction time; use less for slower reaction time
Simpson CPFH09KT Specifications
| Clean Up | Uncured material — Wipe up with cotton cloths. If desired scrub area with abrasive, water-based cleaner and flush with water. If approved, solvents such as ketones (MEK, acetone, etc.), lacquer thinner, or adhesive remover can be used. DO NOT USE SOLVENTS TO CLEAN ADHESIVE FROM SKIN. Take appropriate precautions when handling flammable solvents. Solvents may damage surfaces to which they are applied. Cured material — scrape or brush off surface with a putty knife or wire brush. Tip: wetting the concrete or masonry surface immediately prior to injection will make cured resin easier to remove. |
| Usage Temperature | 60°F to 90°F |
| Color | Polyurethane — clear, accelerator — green, cured — green |
| Storage Conditions | For best results, store in a dry area between 45°F (7°C) and 90°F (32°C). Product is very moisture sensitive. |
| Shelf Life | 12 months from the date of manufacture, unopened |
NOTE: This item is NOT eligible for express shipping, and must ship via Ground only.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
-
400K Square Feet of Warehouse Space
With over 400,000 square feet of warehouse space, Total Fastening is built for speed and scale. We are a full service retailer of Simpson Strong-Tie anchors, connectors, and structural solutions - so you get what you need, when you need it.
-
Real Support from Industry Pros
When you call Total Fastening, you’re talking to experienced professionals—not a call center. Our team understands the products and the jobsite demands. Whether it’s a spec check or a bulk quote, we deliver answers fast and service you can count on.
-
Contractor Partner
From one-man crews to large-scale builders, our sales team is on hand to support contractors at every level. Need bulk pricing? Bidding a job? Our team works directly with you to quote high-volume orders, assist with material lists, and keep your projects on schedule. We know what’s at stake when time and accuracy matter.
